P0138 2011 NISSAN ROGUE - HO2S12 Circuit High Voltage
P0138 2011 NISSAN ROGUE Causes
Faulty Rear Heated Oxygen Sensor Bank 1
Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
Intake air leaks
Exhaust gas leaks
Inappropriate fuel pressure
Faulty fuel injectors
P0138 2011 NISSAN ROGUE Notes
Replacing the Rear Heated Oxygen Sensor Bank 1 usually takes care of the problem.
First diagnose P0138 2011 NISSAN ROGUE code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P0138 2011 NISSAN ROGUE code
The cost of diagnosing the P0138 2011 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0138 2011 NISSAN ROGUE Symptoms
Engine Light ON (or Service Engine Soon Warning Light)
High Fuel Consumption
Excessive Smoke from Exhaust
P0138 2011 NISSAN ROGUE Description
The Heated Oxygen Sensor
2 (HO2S) (Rear O2 Sensor), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank
. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM
) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM
interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM
interprets Rich when the HO2S voltage is above 0.45 V.