P0171 2009 NISSAN ROGUE - Fuel Injection System Too Lean Bank 1

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3

P0171 2009 NISSAN ROGUE Causes

  • Intake air leaks
  • Faulty front heated oxygen sensor
  • Ignition misfiring
  • Faulty fuel injectors
  • Exhaust gas leaks
  • Incorrect fuel pressure
  • Lack of fuel
  • Faulty Mass Air Flow (MAF) sensor
  • Incorrect Positive Crankcase Ventilation (PCV) hose connection
  • P0171 2009 NISSAN ROGUE Notes

    It is very common for P0171 to be caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.

    First diagnose P0171 2009 NISSAN ROGUE code

      Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

    Cost of diagnosing the P0171 2009 NISSAN ROGUE code

      Labor: 1.0

      The cost of diagnosing the P0171 2009 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

    P0171 2009 NISSAN ROGUE Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Excessive Fuel Consumption
  • P0171 2009 NISSAN ROGUE More Information

    Need more information on how to fix the P0171 2009 NISSAN ROGUE code?
    Get Access to Factory Service Manuals

    P0171 2009 NISSAN ROGUE Description

    With the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. The Engine Control Module (ECM) calculates the necessary compensation to correct the offset between the actual and the theoretical ratios.

    In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).