P0171 TOYOTA - Air/Fuel Mixture System Lean Bank 1
P0171 TOYOTA Causes
P0171 TOYOTA NotesIf the P0171 is combined with the P0174 code, it's very likely that the problem is caused by an intake leak. If there are no intake leaks, the next step is to replace the air filter and clean the air flow meter. If the problem persists the front oxygen (O2) sensor may need to be replaced.
There is a factory service bulletin for the following Toyota models:
2005–2007 Toyota Avalon
2007–2008 Toyota Camry
2005-2007 Toyota Avalon, 2007-2008 Toyota Camry Service Bulletin OBDII Code P0171
2005-2006 Toyota Corolla
2005-2006 Toyota Corolla Service Bulletin OBDII Code P0171
User Submitted Video
First diagnose P0171 TOYOTA code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P0171 TOYOTA code
Labor: 1.0The cost of diagnosing the P0171 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P0171 TOYOTA Symptoms
P0171 TOYOTA More InformationNeed more information on how to fix the P0171 TOYOTA code?
Get Access to Factory Service Manuals
P0171 TOYOTA DescriptionWith the Air/Fuel Mixture Ratio Self-Learning Control, the actual mixture ratio can be brought closely to the theoretical mixture ratio based on the mixture ratio feedback signal from the heated oxygen sensors 1. The Engine Control Module (ECM) calculates the necessary compensation to correct the offset between the actual and the theoretical ratios.
In case the amount of the compensation value is extremely large (The actual mixture ratio is too lean.), the ECM judges the condition as the fuel injection system malfunction and light up the MIL (2 trip detection logic).