P0328 2012 NISSAN ROGUE - Knock Sensor Circuit High Input- Bank 1

Repair Importance Level: 1/3
Repair Difficulty Level: 2/3

P0328 2012 NISSAN ROGUE Causes

  • Faulty knock sensor
  • Knock sensor circuit poor electrical connection
  • Knock sensor harness is open or shorted
  • Faulty Engine Control Module (ECM)
  • P0328 2012 NISSAN ROGUE Notes

    The P0328 code means that the Knock Sensor is not working properly. Problems with the knock sensor will not cause an engine performance problems. Replacing the knock sensor usually takes care of the problem. If you have another code besides the knock sensor code fix the other issue first.

    First diagnose P0328 2012 NISSAN ROGUE code

      Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

    Cost of diagnosing the P0328 2012 NISSAN ROGUE code

      Labor: 1.0

      The cost of diagnosing the P0328 2012 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

    P0328 2012 NISSAN ROGUE Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • Possible Lack/Loss of Power
  • P0328 2012 NISSAN ROGUE More Information

    Need more information on how to fix the P0328 2012 NISSAN ROGUE code?
    Get Access to Factory Service Manuals

    P0328 2012 NISSAN ROGUE Description

    The knock sensor is attached to the cylinder block. It senses engine knocking using a piezoelectric element. A knocking vibration from the cylinder block is sensed as vibrational pressure. This pressure is converted into a voltage signal and sent to the Engine Control Module (ECM).