P0445 2012 NISSAN ROGUE - EVAP Canister Purge Volume Control Solenoid Valve Circuit Shorted

Repair Importance Level: 1/3
Repair Difficulty Level: 3/3

P0445 2012 NISSAN ROGUE Causes

  • Faulty Evaporative Emission (EVAP) Purge Solenoid Control
  • Evaporative Emission (EVAP) Purge Solenoid Control harness is open or shorted
  • Evaporative Emission (EVAP) Purge Solenoid Control circuit poor electrical connection
  • P0445 2012 NISSAN ROGUE Notes

    It's a very common problem with Nissan vehicles. If the harness is not damage it's very likely that the problem is the canister purge volume control solenoid valve.

    First diagnose P0445 2012 NISSAN ROGUE code

      Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

    Cost of diagnosing the P0445 2012 NISSAN ROGUE code

      Labor: 1.0

      The cost of diagnosing the P0445 2012 NISSAN ROGUE code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

    P0445 2012 NISSAN ROGUE Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)
  • P0445 2012 NISSAN ROGUE More Information

    Need more information on how to fix the P0445 2012 NISSAN ROGUE code?
    Get Access to Factory Service Manuals

    P0445 2012 NISSAN ROGUE Description

    The Evaporative Emission System (EVAP) Canister Purge Volume Control Solenoid Valve controls flow rate of fuel vapor from the EVAP canister. The opening of the vapor by-pass passage in the EVAP canister purge volume control solenoid valve changes to control the flow rate. The EVAP canister purge volume control solenoid valve repeats ON/OFF operation according to the signal sent from the Engine Control Module (ECM). The opening of the valve varies for optimum engine control. The optimum value stored in the ECM is determined by considering various engine conditions. When the engine is operating, the flow rate of fuel vapor from the EVAP canister is regulated as the air flow changes.

    The EVAP canister purge volume control solenoid valve uses a ON/OFF duty to control the flow rate of fuel vapor from the EVAP canister. The EVAP canister purge volume control solenoid valve is moved by ON/OFF pulses from the ECM. The longer the ON pulse, the greater the amount of fuel vapor that will flow through the valve.